How To Put Chains On Semi Truck

How To Put Tire Chains On A Semi

By Allstate Peterbilt Grouping | Posted in Uncategorized on Tuesday, February 25th, 2022 at 1:00 pm

Driving your semi in treacherous conditions during the winter, when there'southward water ice and/or snowfall on the road, tin can be unsafe. This is where tire chains tin can come in handy. By simply putting these bondage onto your truck's tires when you know you'll be driving on glace roads, yous can get more traction to better maintain control.

Go on in mind that tire chains are meant to be used only when you're required to drive through winter weather conditions, and so they shouldn't be left on your tires once yous don't need them anymore. When roadways are dry, and at that place's no more take chances of slipping, it's time to accept the chains off.

Here's a Short Guide to Putting Tire Chains on Your Semi

In a few easy steps, you tin have your chains on your tires. Hither's a basic guide to help y'all go started:

1. Get-go, you'll want to be sure you're parked in a location that'southward safe and away from traffic. Then, after taking the bondage out of their purse or box, place them flat on the footing with the hooks facing up. Examine the bondage to exist sure they're in good condition and there aren't any twists. To keep things organized, you tin place the chains most the tires that they'll get on.
2. Drape your chains over the acme of your tire. Make sure they are distributed every bit, so one-half of the bondage would fall to the left and the other half would fall to the right. Also, make sure the cams are on the outside of the tire and the hooks are on the within.
   
3. Tuck the chains as close to the front of the tire as you tin get them, and then drive the truck forward (just a couple of feet should be enough) over the chains. Afterwards getting out of the truck, information technology's fourth dimension to hook the inside concatenation earlier fastening the outside chain.
4. Use the cam tightening tool to properly tighten the chains around the tire until they're snug enough that there isn't any slack and they won't brand contact with the truck while you lot're driving.
5. At this point, you tin test the chains past driving your truck for a short altitude, getting out, and inspecting the chains to be sure that they aren't loose. And so, make whatsoever necessary adjustments before you lot get back on the route.

Side note: What tires exercise you chain on a semi truck? The drive wheels.

Always Drive Safely, Fifty-fifty with Tire Chains!

Now that you have a better idea of how to put on tire chains on a semi, yous tin take this extra step to stay safe on the road during the harsh winter season. Only recall, you'll need to reduce your speed (typically, max speeds are around 30 mph) while you're driving with chains on your tires to ensure your own rubber, besides as the safety of other drivers. And it's also of import to be aware of any local requirements regarding when to use tire chains so you can follow the police force.

In one case y'all become the hang of things, y'all'll be able to efficiently put tire chains on your tires, besides as take them off, without spending too much time getting it all done.

---

Sources:

https://www.revinsurance.com/importance-tire-chains-for-semi-trucks/

https://itstillruns.com/how-to-install-semi-truck-tire-chains-13370082.html

https://schneiderjobs.com/blog/how-to-put-tire-chains-on-semi

https://www.youtube.com/lookout?5=TWmm2I5XypA

https://www.youtube.com/lookout?v=_RqpU8Rlwv8

https://www.tirechain.com/Snow-Chains-Truck-Installation.htm

Updated on November 18, 2022

More From Allstate Peterbilt

This entry was posted on Tuesday, February 25th, 2022 at one:00 pm and is filed under Uncategorized. You can follow any responses to this entry through the RSS two.0 feed. Both comments and pings are currently closed.

Source: https://www.allstatepeterbilt.com/blog/tire-chains-on-a-semi/

Share this post